EAP615-Wall
NeuAX1800 Wall Plate WiFi 6 Access Point
- Superior WiFi 6 Speeds: Simultaneous 574 Mbps on 2.4 GHz and 1201 Mbps on 5 GHz totals 1775 Mbps Wi-Fi speeds.**
- High-Performance Connectivity: Guarantee higher network efficiency and lower latency.
- Four Gigabit Ports: 4 Gigabit Ethernet ports (1× uplink + 3× downlink), with one downlink port supporting PoE pass-through to provide power for wired device.‡
- Centralized Management: Integrates into Omada SDN for cloud access and remote management.
- Secure Guest Network: Along with multiple authentication options (SMS/Voucher, etc.) and abundant wireless security technologies.†
- Easy Installation and PoE Support: Easy-to-install design, compatible with 86 mm & EU & US standard junction box, and 802.3af/at PoE support.
Learn more about Omada Wi-Fi 6>
Learn more about Omada Cloud SDN>
New Experience of Room Coverage with WiFi 6
Superior WiFi 6 Speeds
Meet the demands for smoother online activities and more device connections. The latest 802.11ax technologies* such as 1024 QAM and Long OFDM Symbol allows the EAP to boost overall speeds up to 1775 Mbps**.
Learn more about Omada WiFi 6 >
-
1024 QAM
25% more data encoded at one time
-
Long OFDM Symbol
11% faster speed
High-Performance Connectivity for
Better User Experience
The latest WiFi 6 features and advanced wireless techniques guarantee higher network efficiency and lower latency*.
-
MU-MIMO
-
OFDMA
-
BSS Coloring
-
High-Efficiency
WiFi 6 -
Seamless
Roaming† -
Band
Steering
Seamless Integrated into Omada SDN Platform
The Omada Software Defined Networking (SDN) platform integrates network devices including access points, switches, and routers to provide 100% centralized cloud management and create a highly scalable network—all controlled from a single interface.
- Hardware or Software Controllers
- Centralized Cloud Management
- Intelligent Monitoring
Wi-Fi 6 AP for High-Density Environments
Ceiling Mount AP
Wall Plate AP
Outdoor AP
Omada PoE Switch
Omada Hardware Controller
Or
Omada Software Controller
Web Browser
Omada App
Cloud Access
Internet
Omada VPN Router
More than Speed, Security Matters
Safeguard your network and data against brute force attack and snooping with WPA3 enterprise-grade security protection, portal authentication, and segregated guest networks.
-
Secure Guest Network with Up to 16 SSIDs
Guest network access provides enhanced security to guests. Different SSIDs also enable flexible access management.
-
Guest Network with Voucher and SMS Login
Captive portal (including SMS and Voucher)† and 802.1x authentication help maintain authorized guests to use the network. Boost your business with a customized marketing page.
-
WPA3 for Worry-Free Open Public Networks
With advanced enterprise security, WPA3 provides strengthened data security for previously unsecured and open WiFi hotspots.
Effortless Deployment with PoE Powered
With 802.3af/802.3at Power over Ethernet supported, there’s no need to install additional wiring in the building. Plug the existing Ethernet cables in, and you’re ready to go.
TP-Link PoE Switch
Ethernet Cable
Full Gigabit Ports to Bridge Network
Wired devices like VoIP phones can be powered with no need for extra electrical cables. The four data ports (1 uplink + 3 downlinks) transfer data at multiple Gigabits, allowing you to connect several devices to your gigabit network. One of the downlink ports offers PoE pass-through‡ to eliminate the need for that extra power port.
- VoIP Phone
- Printer
- PC
- Smart TV
Quick, Simplified Installation
With an easy-to-install design, there is no need to spend time and money bringing someone in to install our EAP.
*Fits three kinds of wall junctions
-
86 mm wall junction box
-
Standard EU wall junction box
-
Standard US wall junction box
Easy Management with the Omada App
Follow the configuration instructions on the free Omada app to get set up in minutes. Omada lets you configure settings, monitor the network status and manage clients, all from the convenience of a smart phone or tablet.
HARDWARE-FUNKTIONEN | |
---|---|
Schnittstelle | • Uplink: 1× 10/100/1000 Mbps Ethernet Port• Downlink: 3× 10/100/1000 Mbps Ethernet Ports (One port supports PoE OUT. The PoE OUT feature requires 802.3at PoE+ input.The maximum power output for POE pass-through is 13 W (EU version) or 12 W (US version), based on laboratory testing.) |
Physischer Diebstahlschutz | Yes |
Taste | Reset |
Spannungsversorgung | 802.3af/at PoE |
Energieverbrauch | • EU: 10W (802.3at PoE, PoE Out off) • US: 11.5W (802.3at PoE, PoE Out off) |
Abmessungen (B*T*H) | 143 × 86 × 20 mm (5.6 × 3.4 × 0.8 in) |
Antenne | 2 Dual-Band Antennas• 2.4 GHz: 2× 3 dBi• 5 GHz: 2× 4 dBi |
Montage | Wall Plate Mounting |
WLAN-FUNKTIONEN | |
---|---|
Coverage | 50㎡(600 ft²)△ |
Concurrent Clients | 120+△ |
WLAN-Standards | IEEE 802.11ax/ac/n/g/b/a |
Frequenz | 2.4 GHz and 5 GHz |
Signalrate | • 5 GHz: Up to 1201 Mbps• 2.4 GHz: Up to 574 Mbps |
WLAN-Funktionen | • 16 SSIDs (Up to 8 SSIDs on each band)• Enable/Disable Wireless Radio• Automatic Channel Assignment• Transmit Power Control (Adjust Transmit Power on dBm)• QoS(WMM)• Omada Mesh†• Seamless Roaming(802.11k/v/r)†• Beamforming• MU-MIMO• Rate Limit• Load Balance• Airtime Fairness• Band Steering• Reboot Schedule• Wireless Schedule• RADIUS Accounting• MAC Authentication• Wireless Statistics• Static IP/Dynamic IP |
WLAN-Sicherheit | • Captive Portal Authentication†• Access Control• Wireless Mac Address Filtering• Wireless Isolation Between Clients• VLAN• Rogue AP Detection• 802.1X Support• WPA-Personal/Enterprise, WPA2-Personal/Enterprise, WPA3-Personal/Enterprise |
Sendeleistung | • CE:< 20 dBm (2.4 GHz, EIRP)< 23 dBm (5 GHz, EIRP)• FCC:< 21 dBm (2.4 GHz)< 21 dBm (5 GHz) |
VERWALTUNG | |
---|---|
Omada App | Yes |
Centralized Management | • Omada Cloud-Based Controller• Omada Hardware Controller (OC300)• Omada Hardware Controller (OC200)• Omada Software Controller |
Cloud Access | Yes. Requiring the use of OC300, OC200, Omada Cloud-Based Controller, or Omada Software Controller. |
Benachrichtigung per E-Mail | Yes |
LED abschaltbar | Yes |
Managementzugriff MAC-Adress-basiert filterbar | Yes |
SNMP | v1, v2c, v3 |
Lokales/Remote-Systemprotokoll | Local/Remote Syslog |
SSH | Yes |
Weboberfläche | HTTP/HTTPS |
Layer3-Management | Yes |
Multi-Site-Management | Yes |
Management VLAN | Yes |
Zero-Touch Provisioning | Yes. Requiring the use of Omada Cloud-Based Controller. |
SONSTIGES | |
---|---|
Zertifizierung | CE, FCC, RoHS |
Verpackungsinhalt | • EAP615-Wall(5-Pack)• Installation Guide• Mounting Kit |
Systemanforderungen | Microsoft Windows XP, Vista, Windows 7, Windows 8, Windows 10, Windows 11, Linux |
Umgebung | • Operating Temperature: 0–40 ℃ (32–104 ℉)• Storage Temperature: -40–70 ℃ (-40–158 ℉)• Operating Humidity: 10–90% RH non-condensing• Storage Humidity: 5–90% RH non-condensing |
*Use of WiFi 6 (802.11ax) and features including OFDMA and MU-MIMO requires client devices to support the corresponding features.
**Maximum wireless signal rates are the physical rates derived from IEEE Standard 802.11 specifications. Actual wireless data throughput and wireless coverage are not guaranteed. They will vary due to factors including network conditions, client limitations, and environmental factors, including building materials, obstacles, volume and density of traffic, and client location.
†Seamless roaming may require upgrading the firmware. The use of Omada Mesh and Seamless Roaming, and Captive Portal requires Omada SDN controllers. Please refer to the User Guides of Omada SDN controllers for configuration methods.
‡PoE pass-through is only available when 802.3at powers the device. The maximum power output for POE pass-through is 13 W (EU version) or 12 W (US version), based on laboratory testing. Actual power delivered to the device may vary.
§Zero-Touch Provisioning and Auto Channel Selection and Power Adjustment require the use of Omada Cloud-Based Controller. Go to https://www.tp-link.com/en/omada-cloud-based-controller/product-list/ to confirm which models are compatible with Omada Cloud-Based Controller.
△The actual capacity depends on the wireless environment and client traffic and is generally less than the maximum number of client connections.
***Coverage value is calculated based on laboratory testing. Actual coverage is not guaranteed and will vary as a result of client limitations and environmental factors.